Description
Technical specifications :
FUNCTIONS :
- DISPLAY
- Welcome page with MOD7 RACING picture
- 2 data pages when not using the engaged gear information
- 3 data pages when using the calculated engaged gear information
- 4 data pages when using the gearbox information for sequential gearbox
- Tachometer in Bargraph format with programmable red zone
- Tachometer in Needle new format
- Oil Pressure and Water Temperature in meter new style format
- Gearbox in very large character on pages 3 and 4
- Brightness 3 levels for more comfort
- TACHOMETER
- Displayed from 0 up to 10000 rpm
- Page1 : Bargraph format up to 9000 rpm with programmable red zone
- Page2 : Needle format up to 10000 rpm
- Digital value up to 10000 rpm displayed on page 1
- Need to be connected either to the rpm output of the ECU or to the primary coil connection
- Display the max reached rpm when the engine is cut off
- GEARBOX INDICATOR
- For sequential gearbox using the 3rd analog input (not available for C2R2 gearbox)
- For classic, H and Crabots gearboxes, calculated value between tachometer and wheel speed
- Auto-learning of the gear value can be realized while driving
- SHIFT LIGHT
- 5 ultra-bright leds : 2 green, 1 orange, 2 red
- Leds turn on progressively at their user-defined rpm values (sequential), then flashing when all leds turn on
- Each led has its own rpm turn on value
- WATER TEMPERATURE
- May read the original water sensor of the car with a possible software correction (ré-étalonnage)
- Alert 1 for programmable over-temperature with a red led
- he box color for water temperature changes from GREEN > RED in case of alert
- Maximum reached value always displayed on page 1
- Possibility to read a MOD7 water sensor for more reliability
- OIL PRESSURE
- Need a 10 bars VDO sensor (not supplied)
- Programmable OIL Alert with red OIL led for low pressure from 0.5 to 2.0 bars
- The box color for the oil pressure changes from GREEN > RED in case of alert
- Maximum reached value always displayed on page 1
- 3rd FUNCTION TO PROGRAM either :
- GEAR BOX INDICATOR
- Available for sequential gearbox including potentiometer
- Displayed on every pages
- R (Reverse), N (Neutral), 1, 2, 3, 4, 5 et 6
- FUEL GAUGE
- Can read the original sensor of the fuel tank
- Displayed only on page 2
- Programmation by 10 liters steps from 00 to 60 liters max
- FUEL PRESSURE
- Need a 10 bars VDO sensor (not supplied)
- Displayed only on page 1
- Low pressure alert AL2 with an orange led programmable from 2,5 to 4,0 bars
- TURBO PRESSURE
- Need a 2 bars VDO sensor (not supplied)
- Displayed only on page 1
- High pressure alert AL2 with an orange led programmable from 0,5 to 2,0 bars
- GEAR BOX INDICATOR
- SPEEDOMETER
- Display up to 300 km/h on pages 2 et 3
- Using the supplied ‘ils’ magnetic sensor switched by a magnet
- Circumference of the wheels can be set from 140cm (10″) to 230cm (21″)
- Memorize the maximum speed value and display on page 2 it when the engine is cut off
- DISTANCES
- Total distance traveled up to 50000km
- Day Trip up to 999,9km with manual reset
- DATA ANALYSIS
- Available as an option (to be ordered with the dashboard)
- Data Acquisition for RPM, Speed, Gear, Water Temp, Oil Pressure
- Acquisition every 0,2ms (5 times per seconde)
- Maximum recording duration : 2 heures
- Display before recording directly on the dash screen
- Stop / Start without any data erasure
- Visualization in 2 parts : Graphic / Digital values
INSTALLATION : SO EASY !!!
- Dimensions : 160 x 92 x 19 mm
- Total weight with speed sensor and harness : approx. 380grs
- Fixation using 4 supplied M5 anti-vibrations ‘Silentbloc’
- Electrical harness with connector
- Contents :
- 1 dashboard MOD7 EvoXF
- 4 silentbloc fixation plots
- 2 electrical 50cm lenght harness
- 1 magnetic speed sensor + 1 magnet
- 1 instruction manual with scheme in english or french
Warranty : 1 year